0101
Group I
Solvent-refined paraffinic base stocks with useful solvency for lubricant, grease and industrial formulations.
- SN60
- SN150
- SN300 / SN350
- SN500
- Bright Stock
- Origin-specific grades
All products
Virgin & re-refined
Base Oils
Multi-origin Group I, Group II, Group III and re-refined base oils for lubricant blenders, refiners and industrial customers.
Supply scope
Selected around the application—not only the grade.
Base oils are a core Axis supply category. We supply virgin Group I, Group II and Group III base stocks, together with re-refined alternatives, from established origins in Saudi Arabia, the United States, India and Türkiye. Each offer is built around the required viscosity, technical specification, volume, loading format, destination and repeat-purchase plan.
Available product scope04 categories
01Group I — SN60, SN150, SN300 / SN350, SN500 and Bright Stock
02Group II — 70N, 150N, 220N and 500N
03Group III — 4 cSt, 6 cSt and 8 cSt
04Re-refined Base Oils (RRBO) — specification-led alternatives
Complete product range
Portfolio by subfamily.
Each subfamily is quoted against the technical profile, end use, destination market and delivery program—not as an undifferentiated catalogue item.
0201
Group II
Hydroprocessed base stocks offering higher purity, lower sulfur and strong oxidation stability.
- 70N
- 150N
- 220N
- 500N
0301
Group III
Very-high-viscosity-index base stocks for high-performance and synthetic-positioned lubricant formulations.
- 4 cSt
- 6 cSt
- 8 cSt
- Origin-specific alternatives
0401
Re-refined Base Oils (RRBO)
Reprocessed base oil alternatives supporting circular resource use, qualified by achieved specification rather than feedstock pathway alone.
- Producer-specific viscosity grades
- TDS-confirmed API group
- Batch-specific COA
- Origin-specific alternatives
Technical review
What buyers need to evaluate.
Base oils are not selected by trade name alone. Axis compares the buyer's viscosity window, VI, volatility, sulfur, color, low-temperature behavior and approved origin before issuing an offer. The figures below are documented reference profiles from prior supply discussions—not universal specifications.
SN150
Kinematic viscosity @ 100°C5.108 cSt
Viscosity index96
Flash point214°C
Pour point−12°C
Sulfur0.9%
Water58 mg/kg
Typical reference values. Final acceptance is based on the offered producer TDS and the shipment batch COA.
SN500
Kinematic viscosity @ 100°C10.60 cSt
Viscosity index89
Flash point252°C
Pour point−18°C
Sulfur1.2%
Water75 mg/kg
Typical reference values used for initial matching. Batch values and test methods are confirmed in the commercial documentation.
70N–500N
Available grades70N / 150N / 220N / 500N
Range positionLight to heavy neutrals
Primary reviewKV40 / KV100 / VI
Composition reviewSulfur + saturates
Application routeAutomotive + industrial
Final confirmationTDS + batch COA
Group II values vary by viscosity grade and producer. Axis confirms the offered origin, current TDS and shipment COA before commercial acceptance.
4 cSt
Viscosity grade4 cSt
Viscosity index121
Flash point200°C
Pour point−36°C
Density0.8423 g/cm³
Volatility reviewNoack on request
Türkiye-origin documented reference. Noack volatility and all formulation-critical values are confirmed against the current TDS or COA before approval.
Specification-led RRBO
Grade availabilityProducer-specific
Achieved API groupConfirmed by TDS
Core checksKV / VI / color
Composition checksSulfur + saturates
Cleanliness checksWater + sediment
Final confirmationTDS + batch COA
Re-refined base oils are qualified producer by producer and batch by batch. No universal value is implied across origins or viscosity positions.
Product selection
Parameters reviewed before a grade is offered.
01Kinematic viscosity at 40°C and 100°C
02Viscosity index
03Color and appearance
04Sulfur and saturation
05Flash point and pour point
06Noack volatility where applicable
Axis supply program
From a technical requirement to a controlled delivery.
Spot or recurring supply
Single cargoes, trial orders and monthly programs are structured according to grade availability, origin and destination.
Origin alternatives
The same viscosity position can be screened across several origins when the buyer permits technical equivalents.
Pre-shipment control
The applicable TDS is reviewed before quotation and the final batch is supported by a COA and shipping documentation.
Blender-focused logistics
Flexitank, isotank, drums, IBC and bulk options are assessed against volume, discharge capability and landed cost.
Applications
Where this portfolio works.
Supply formats
Chosen for volume, product integrity and receiving capability.
- Flexitank
- Isotank
- Bulk vessel
- IBC
- Steel drums
Documentation
Availability is confirmed for the exact offered producer and batch.
- Technical Data Sheet (TDS)
- Safety Data Sheet (SDS)
- Certificate of Analysis (COA)
- Country of origin information
- Batch documentation
What to send us
A complete brief shortens product matching and quotation time.
- Required group, grade and viscosity
- Target technical values or reference TDS
- Volume or monthly program
- Packaging / loading format
- Destination port and Incoterm
- Required delivery window
Before you enquire
Commercial and technical questions.
Which Group I grades can Axis supply?
The core Group I range includes SN60, SN150, SN300 / SN350, SN500 and Bright Stock, subject to current origin, specification and loading availability.
Which Group II and Group III grades are available?
The Group II range includes 70N, 150N, 220N and 500N. The Group III range includes 4 cSt, 6 cSt and 8 cSt positions, with the applicable viscosity, VI and volatility profile confirmed for the offered producer.
Can Axis quote an equivalent to our current SN150 or SN500?
Yes. Send the current TDS or the parameters that are critical to your formulation. We compare viscosity, VI, color, sulfur, flash point, pour point and origin before presenting an alternative.
Can Group III 4 cSt be evaluated for volatility?
Yes. Where Noack volatility is a formulation requirement, it is requested and confirmed with the supplying producer before technical approval.
Are re-refined base oils supplied under the same process?
Yes, with added attention to feedstock consistency, color, sulfur, viscosity and batch-to-batch control. Re-refined describes the production pathway—not a separate API group—so the achieved group and exact specification are confirmed through the producer TDS and shipment COA.
Commercial enquiries
Send the grade, specification, volume and destination.
The online portfolio represents Axis supply capability, not a closed stock list. Share your current product, reference TDS or target values and we will assess the appropriate origin, grade, pack and delivery route.
Request a detailed supply offer